top of page

FAQ

  • How do I start off with O-Care?
    We advise to use a pipe cleaner and renew the water before you start, this way we have a fair base to start from. This is also mentioned in the manual inside of the box.
  • How much do I need to add?
    A box of O-Care will last 2-5 months depending on the volume of your hot tub. Check how much water is in your hot tub and than find the corresponding amount you need on the dosing chart which is on the bottle and in the manual.You always need to add the same amount of O-Care number 1 as O-Care number 2.Example: If the hot tub volume is 396 Gallons you need to add 5,1 Oz of O-Care no 1 and also 5,1 Oz of O-Care number 2
  • I just added O-Care and the water is cloudy, can I get into the water?
    Yes you can, O-Care is made up off minerals and it will not be harmful to you even if you just added it and the water is still a bit cloudy.
  • I’ve added O-Care number 1&2 in the wrong order, what should I do?
    That’s not a problem just make sure you’ve put the pumps on for better mixing. The reason for adding no 1 first and then no 2 only makes O-Care more soluble. If you added no 2 first it might take the water a little longer to clear.
  • If I use O-Care can I discard all other product and just use O-Care to maintain the water in my hot tub?
    O-Care will make water maintenance a lot easier but one product that does it all unfortunately does not exist. Water maintenance is a form of chemistry and balancing and sanitising water are two different things which depend on many factors.
  • Do I still need to use Chlorine?
    Most sanitisers will work in combination with O-Care, if you’re used to using Chlorine and you like it than don’t change.
  • Do I still need to use Bromine?
    Most sanitisers will work in combination with O-Care, if you’re used to using Bromine and you like it than don’t change.
  • What is the difference between Chlorine and Bromine?
    Chlorine will work faster than Bromine and is more commonly used because of this. Bromine will work on a wider pH range which is why some prefer it.
  • What do I need to do when I use O-Care?
    With normal use of the hot tub you will only need to do 3 steps: - Add O-Care once a week - Check the pH level and adjust if needed - Check sanitizer level (chlorine or bromine or other) and adjust if needed
  • What are the ingredients?
    A blend of high quality minerals that have the ability to loosen sediments from all surfaces within the hot tub. Sediments are a main cause to high sanitizer demand, cloudy water, scaling, corrosion of equipment, scum lines, eye and skin irritation.
  • I’ve added O-Care number 1&2 in the wrong order, what should I do?
    That’s not a problem just make sure you’ve put the pumps on for better mixing. The reason for adding no 1 first and then no 2 only makes O-Care more soluble. If you added no 2 first it might take the water a little longer to clear.
bottom of page